Brand APC / MGE model SURT1000UXICH device type on-line UPS rated capacity 1 (KVA) Output voltage range 220 (V) input voltage range 220 (V) loaded with 15 minutes of standby time conversion time 0 (milliseconds (ms)) Service Description This product supports seven days no reason to return Products Smart-UPS APC UPS power supply SURT1000VA 230V 1KVA SURT1000ICHSURT1000UXICH APC Smart-UPS On-Line, 700W / 1000VA, Input 230V / Output 230V, Rack Height 2U include: CD with software, Smart-UPS RS232 signal Cord, User Manual Standard Lead Time: usually provide electricity supply shelf Smart-UPS SURT1000UXICH performance and availability advantages of automatic internal bypass in case of UPS overload or failure to connect the load can be extended run time allows more rapid increase in the time required The running time of the intelligent battery management through intelligent, precision charging technology for optimal battery performance, life and reliability. Hot-swappable battery replacement battery the whole process to ensure a clean, uninterrupted power to protected equipment automatic restart after load after UPS shutdown when utility power is restored, then automatically restarts the connected equipment. Temperature compensated battery charging actual battery temperature adjustment charge voltage to extend battery life and easy management of network management is provided through a network based on remote management of the UPS is compatible with InfraStruXure Manager for centralized management via the APC InfraStruXure Manager software. Slot SmartSlot Customize UPS capabilities with management cards with visual indicators LED status indicators Quickly understand unit and power status. Serial connection through the serial port on the UPS management. Plug the external battery when the UPS adaptability additional run time to ensure that the load clean, uninterrupted power supply rack / tower converted when migrating from tower to rack-installation environment protection UPS initial investment flash memory Upgrading firmware remotely using FTP install firmware maintenance releases. Serviceability User-replaceable batteries can simply upgrade and replace the battery automatic self-test Periodic battery self ensure early detection of the need to replace the battery. Early warning of fault notification can provide predictive analysis to ensure that the parts be replaced Disconnected battery notification does not provide backup power when the battery warning sound alarm notification system provide protection frequency and voltage adjustments related to changes in the mains and UPS conditions can not be used in correcting poor frequency and voltage conditions the battery, thus providing higher availability. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Input power factor correction by use of small generators and cabling, installation costs at least compatible when using generator power generator, ensure clean, uninterrupted power to protected equipment cold start capability when the electricity stops providing temporary battery power reset line switch can not replace the fuse and easy to recover from an overload of. Safety-agency certified products have been tested and certified to ensure that the service provider equipment and within the specified environment connected with the work safely. Technical Specifications Output Output Power Capacity: 700 Watts / 1000 VA Max Configurable Power: 700 Watts / 1000 VA Nominal Output Voltage: 230V output voltage adjustable range: 220, 230 or 240 can be set to output voltage at full load efficiency: 88 % Output Voltage Distortion: Less than 3% of the output frequency (frequency synchronization with the master): 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Crest Factor: 3: 1 Waveform Type: Sine wave Output Connections: (6 ) IEC 320 C13 (1) IEC Jumpers Bypass: Built bypass input Rated input voltage: 230V Input Frequency: 50/60 Hz +/- 5 Hz (automatic adaptation) Input Connections: IEC-320 C14 Operating voltage range: 160 - 280V Input voltage adjustable range: 100 - 280V Other Input voltage: 220,240 Batteries & Runtime Battery Type: No internal battery - using an external battery system empty battery compartment: a replaceable battery pack: RBC31 Communications & Management Interface Port: DB -9 RS-232, SmartSlot Smart slot number of available slots: one control panel: LED status display with load and battery bar-graphs and "online", "On Battery", "Replacing the battery", "overload" and "Bypass" indicator. Audible alarm: when the mains power failure alarm: distinctive low battery alarm overload continuous tone alarm Emergency Power Off: Optional Surge Protection and Filtering Surge energy rating: 420 Joules Filtering: Multi-level noise filter, comply with UL1449 standard physical indicators High: 432.00 mm Width: 85.00 mm deep: 483.00 mm Rack Height: 2U Weight: 12.55 KG Shipping Weight: 17.35 KG Shipping Height: 286.00 mm Shipping Width: 630.00 mm Shipping Depth: 594.00 mm color: black on each pallet Quantity: 12.00 Environmental Operating Environment: 0 - 40 ° C Operating Relative Humidity: 0 - 95% Operating Elevation: 0-3000 meters Storage Temperature: -20 - 50 ° C Storage Relative Humidity: 0 - 95% Storage Elevation: 0 15,000 meters Audible noise at 1m from surface: 50.00 dBA Online Thermal Dissipation: 239.00 BTU / hr Conformance Regulatory Approvals: C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 A-level, EN 60950 , EN 61000-3-2, GOST, VDE Standard Warranty: repair or replacement, field service two years to extend the availability of internal authorization optional Environmental Compliance: RoHS 7b Exemption, China RoHS